This is the completed frame for the quadrocopter. Currently the landing gear are merely an extension of the main bolts through the frame, I hope to devise an improved set of landing gear or equip the quadrocopter with retractable landing gear in the future. After three flights with this quadrocopter I must say that it […]
Monthly Archives: October 2011
Here are some pictures of the 3D printed frame being assembled for my quadrocopter. The motor mounts were very strong when mounted to the aluminum arms. Additionally, the mounts were designed in such a way that the bolts connecting to the bottom of the motor would be flush against the arm, preventing them from loosening […]