Frame Design Download here. Build Tutorial here. Additional Content at RC Tutor. Parts List: Arms – 1″x1″x36″ Basswood Motors – 400~800KV ESC – 30~40A Battery – 4~6S 5000mAh+ Props – 12~15″ (8) M5x35mm Bolts (8) M5 hex nuts (8) M3x35mm Bolts Featured By: Gizmodo Popular Science AIAA Daily Launch Military.com
Category Archives: Flight
Through my research at the Marshall Space Flight Center and continued development as part of my undergraduate honors thesis, I have chosen to publish my PX4 Development Kit for Simulink. This toolkit includes a configurable dynamic model for a wide range of multicopter configurations, as well as a more complex position control system using a Kalman […]
Flight Video: Bill of Materials: [Qty. 1] Super Simple Mini H-Quad V2.0 Frame [Qty. 1] CC3D Flight Controller [Qty. 2] APC 5545E Electric Prop [Qty. 2] APC 5545EP Electric Prop [Qty. 4] MT-1306 10 3100KV Tiger Motor [Qty. 1] USB Programmer [Qty. 4] Turnigy Plush 6A ESC [Qty. […]
This frame was designed for AP and FPV with the idea of reducing as many vibrations to the camera as possible. The carbon tubes and rubber dampers are common parts for XAircraft frames that can be purchased at a low cost. The V shape allows cameras to be mounted above the loading pipes without the […]
My previous Xaircraft X4 build never really served the purpose for which I had intended it to be used for; an AP/FPV platform with a reliable autopilot fail safe. The problem with my X4 was that the Avroto motors were quite large and created lots of resonating vibration throughout the frame. This created lots of jello, or […]