In order to obtain more stable and responsive flight with my flight controller I decided to flash my four 30A BlueSeries speed controllers with SimonK’s custom firmware. The hardware of the ESCs I have received has been updated and no longer has the same component layout as the old 30A BlueSeries. The board now only contains N-Fets instead […]
Category Archives: Flight
In order to obtain more stable and responsive flight with my hexacopter I decided to flash the six 25A redbrick speed controllers with SimonK’s custom firmware. For more information see the RCGroups thread. First I cut the heat shrink from each speed controller and removed the top heat sink so that the programming pads were accessible. Using standard […]
This is the bill of materials for my Xaircraft Carbon Fiber X4 drone. I plan to use higher performance components than my previous builds with the addition of a budget autopilot system. The above model for the Xaircraft X4 frame with Avroto motors can be found here. [Qty. 1] Xaircraft X4 Carbon Fiber DIY Frame […]
DOWNLOAD MODEL Note: The model requires Windows with Autodesk Inventor.
I decided to rewire my current lighting setup after switching out the Xaircraft camera skids for the standard claws. I used six segments of Hobbyking Red LEDs with 3 LEDs per segment. Using servo wires I soldered a connection between the bullets connectors of each motor and the LEDs. It does not matter which two motor wires […]