Flight
Xaircraft X4 Drone Bill of Materials
This is the bill of materials for my Xaircraft Carbon Fiber X4 drone. I plan to use higher performance components than my previous builds with the addition of a budget autopilot system.
The above model for the Xaircraft X4 frame with Avroto motors can be found here.
[Qty. 1] Xaircraft X4 Carbon Fiber DIY Frame
[Qty. 1] APC220 478MHz Communications Module
[Qty. 1] 100A Power Distribution Board
[Qty. 1] JST Cables
[Qty. 4] Avroto 2814 Short Shaft 350W 770kV Brushless Motor
[Qty. 2] 10×4.5 Pair of Carbon Reinforced Props [For lifting FPV gear I recommend 11″ props]
[Qty. 4] 30A Blue Series Brushless ESCs
[Qty. 1] Black Vortex Flight Controller
Download: Complete Bill of Materials
Additional information for this build:
Flashing the Flysky/Turnigy 9X with ER9X