Bill of Materials: [Qty. 1] Turnigy 9X (no module) [Qty. 1] FrSky 2.4GHz DJT Module [Qty. 1] 5.8GHz 200mw wireless video system [Qty. 1] 2650mAh TX LiPo Battery [Qty. 1] LED Backlight kit The first step in assembling the ground station is to prepare the video receiver. I chose to purchase the 200mW 5.8GHz video […]
Category Archives: Control
I came across this antenna design by HugeOne at FPVLAB. I found the antenna to be rather complicated to build as specified in the tutorial, so I made some modifications to the process that seem to ease the build and produce results with much higher tolerances. This tutorial shows how to build a 5.8GHz turbine […]
Recently I decided to purchase a set of Fat Shark Predator FPV Goggles, available from hobbyking. The package, including an extra 700mAh battery, arrived promptly and in good condition. Within the box, each item, along with the instruction manual, is packaged in plastic bags in a cardboard tray. This set includes the video transmitter, CCD […]
This is a tutorial of how I flashed and setup my transmitter for use with MultiWii and Ardupilot, more information can be found here. You will need to be sure that you have access to an ISP programmer in order to flash the firmware of the transmitter. I use the Sparkfun Pocket AVR Programmer but […]
This is my solution to having an inexpensive FPV ground station. One of its greatest benefits is being able to easily redirect the direction of the FPV antenna without the need for an expensive antenna tracker. Keep in mind that this is made to be an inexpensive FPV platform. Parts List: [Qty. 1] 20cm Servo […]